Show Lldp Interface - Dell 8 Command Reference Manual

show lldp interface

Displays the LLDP status on the specified interface.
Synopsis show lldp interface [{in | ex}tengigabitethernet slot/port]
Operands extengigabitethernet
intengigabitethernet
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display the LLDP status on the specified interface.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display all the LLDP interface information for a selected interface:
See Also none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
switch#show lldp interface intengigabitethernet 0/0
LLDP information for Te 0/0
State:
Mode:
Advertise Transmitted:
Hold time for advertise: 120 seconds
Re-init Delay Timer:
Tx Delay Timer:
DCBX Version :
Auto-Sense :
Transmit TLVs:
DCBX FCoE Priority Bits: 0x8
Enabled
Receive/Transmit
30 seconds
2 seconds
1 seconds
CEE
Yes
Chassis ID
TTL
DCBX FCoE App
Link Prim
show lldp interface
Port ID
IEEE DCBX
DCBX FCoE Logical Link
Brocade Link
115
6