Show Vlan Classifier - Dell 8 Command Reference Manual

3

show vlan classifier

show vlan classifier
Displays information about a specific VLAN classifier group.
Synopsis show vlan classifier [group number | interface group number | port-channel number | rule
number | {in | ex}tengigabitethernet slot/port | vlan vlan_id]
Operands group number
interface group number
port-channel number
rule number
tengigabitethernet
vlan vlan_id
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display information about all configured VLAN classifier groups or a specific
VLAN interface group.
Usage If a group ID is not specified, all configured VLAN classifier groups are shown. If a group ID is
Guidelines specified, a specific configured VLAN classifier group is shown.
Examples To display the VLAN classifier for group 1:
See Also none
50
Specifies the VLAN classifier group number. The range of valid values is 1-16.
Specifies the VLAN classifier interface group number. The range of valid
values is 1-16.
Specifies the VLAN classifier port-channel number. The range of valid values
is 1-63.
Specifies the VLAN classifier rule number. The range of valid values is 1-256.
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number
Specifies the VLAN to display. The range of valid values is 1-3583.
switch#show vlan classifier group 1
vlan classifier group 1 rule 1
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01