Rmon Collection History - Dell 8 Command Reference Manual

rmon collection history

Collects the periodic statistical samples of Ethernet group statistics on an interface for later
retrieval.
Synopsis rmon collection history number [buckets bucket_number | interval seconds | owner name]
no rmon collection history number
Operands number
buckets bucket_number
interval seconds
owner name
Defaults The collection of RMON history is not enabled.
Command Interface configuration mode
Modes
Description Use this command to collect Ethernet group statistics on an interface. Use the no rmon collection
history command to disable the history.
Usage There are no usage guidelines for this command.
Guidelines
Examples To collect RMON statistics for the owner admin on 10 Gbps Ethernet interface 0/1:
See Also show rmon history
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the RMON collection control index value. The range of valid values
is 1-65535.
Specifies the maximum number of buckets for the RMON collection history.
The range of valid values is 1 to 65535.
Specifies the alarm sample interval in seconds. The range of valid values is
1-2147483648.
Specifies the identity of the owner. The maximum number of characters is 32.
switch(config)#interface intengigabitethernet 0/1
switch(conf-if-te-0/1)#rmon collection history 5
rmon collection history
15
233