Sflow Polling-Interval (Interface Version) - Dell 8 Command Reference Manual

sflow polling-interval (interface version)

Configures the polling interval at the interface level.
Synopsis sflow polling interval interval value
no sflow polling interval
Operands interval value
Defaults The default counter polling interval value is 20 seconds.
Command Interface Mode
Modes
Description Use this command to configure the polling interval for an interface. The interval is the maximum
number of seconds between successive samples of counters to be sent to the collector.
Use the no sflow polling interval interval command to return to the default value.
Usage There are no usage guidelines for this command.
Guidelines
Examples To set the polling interval to 135 seconds:
See Also sflow polling interval (global version)
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies a value in seconds to set the polling interval. The range of valid
values is 1-65535.
switch(conf-if-te-0/1)#sFlow polling interval 135
sflow polling-interval (interface version)
13
221