Fcoe-Vlan - Dell 8 Command Reference Manual

fcoe-vlan

Configures an FCoE VLAN to the FCoE map and deletes the previous FCoE VLAN.
Synopsis fcoe-vlan vlan_id
Operands vlan_id
Defaults There are no default configurations for this command.
Command Feature configuration mode
Modes
Description Use this command to configure an FCoE VLAN to the FCoE map. Using this command deletes the
previous FCoE VLAN.
Usage There are no usage guidelines for this command.
Guidelines
Example You must first enter FCoE map mode, then configure the VLAN.
switch(config)#fcoe-map default
switch(conf-fcoe-map)#fcoe-vlan 5
See Also fcoe-map, fcoeport
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the VLAN interface to configure. The range of valid values is from 2
to 3583.
9
fcoe-vlan
139