Port-Channel Path-Cost - Dell 8 Command Reference Manual

port-channel path-cost

Sets the path-cost behavior.
Synopsis port-channel path-cost [custom | standard]
Operands custom
standard
Defaults The default path-cost is standard.
Command Protocol Spanning Tree mode
Modes
Description Use this command to set the path-cost behavior for the port-channel.
Usage There are no usage guidelines for this command.
Guidelines
Examples To set the behavior for the path-cost to custom:
To set the behavior for the path-cost to standard:
See Also none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies to use the custom behavior, which sets the path-cost changes
according to the port-channel's bandwidth.
Specifies to use the standard behavior, which sets that the path-cost does not
change according to port-channel's bandwidth.
switch(conf-mstp)#port-channel path-cost custom
switch(conf-mstp)#port-channel path-cost standard
port-channel path-cost
11
169