Chapter 2
Command Line Interface
Table 2-1
Level
User
Viewer Password required. This level enables monitoring functionality. All show
Admin Password required. For use by general administrators, the Admin
Root
CLI Command Mode Hierarchy
The set of all CLI commands is grouped in hierarchical order, according to the type of the commands.
The first two levels in the hierarchy are the User Exec and Privileged Exec modes. These are
non-configuration modes in which the set of available commands enables the monitoring of the SCE
platform, file system operations, and other operations that cannot alter the configuration of the SCE
platform.
The next levels in the hierarchy are the Global and Interface configuration modes, which hold a set of
commands that control the global configuration of the SCE platform and its interfaces. Any of the
parameters set by the commands in these modes should be saved in the startup configuration, such that
in the case of a reboot, the SCE platform restores the saved configuration.
Table 2-2
Table 2-2
Mode
User Exec
Privileged Exec
Global Configuration
OL-7827-12
Authorization Levels
Description
Password required. This level enables basic operational functionality.
commands are available to the Viewer authorization level, with the exception
of those that display password information.
authorization level enables configuration and management of the SCE
platform.
Password required. For use by technical field engineers, the Root
authorization level enables configuration of all advanced settings, such as
debug and disaster recovery. The Root level is used by technical engineers
only.
shows the available CLI modes.
CLI Modes
Description
Initial mode. Also allows
monitoring of the system (show
commands).
General administration; file
system manipulations and
control of basic parameters that
do not change the configuration
of the SCE platform.
Configuration of general system
parameters, such as DNS, host
name, and time zone.
Authorization and Command Levels (Hierarchy)
Level
User/Viewer
•
Admin
•
Root
Admin
•
Root
•
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Value Prompt
0
>
5
>
10
#
15
#>
Prompt indication
SCE >
•
SCE #
•
>
SCE #
•
SCE (config)#
>
•
SCE (config)#
2-3