Table of Contents
Advertisement
Chapter 7
Configuring the Connection
Configuring the Behavior of the SCE Platform in Case of Failure of the SM
Options
The following options are available:
•
•
•
•
From the SCE(config if)# prompt, type
Step 1
[force-failure|none|remove-mappings|shut] and press Enter.
Configures the action of the SCE platform in the case of failure of the connection to the SM.
Configuring the SM-SCE Platform Connection Timeout
You can also configure the timeout interval; the length of time that the SM-SCE platform connection is
disrupted before a failed connection is recognized and the configured behavior is applied.
Options
The following option is available:
•
From the SCE(config if)# prompt, type subscriber sm-connection-failure timeout interval and press
Step 1
Enter.
Configures the connection timeout.
OL-7827-12
force-failure — Force failure of SCE platform. The SCE platform then acts according to the
behavior configured for the failure state.
remove-mappings — Remove all current subscriber mappings.
shut — The SCE platform shuts down and quits providing service.
none (default ) — Take no action.
interval — the timeout interval in seconds
Configuring the SCE Platform/SM Connection
sm-connection-failure action
subscriber
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
7-11
Advertisement
Table of Contents
