Deleting An Scmp Peer Device; Defining The Subscriber Id - Cisco SCE2020-4XGBE-SM Configuration Manual

Configuring the SCMP

Deleting an SCMP Peer Device

You cannot delete an SCMP peer device that has anonymous groups assigned to it. You must remove all
associated anonymous groups before deleting the device.
First remove all anonymous groups assigned to the device:
Step 1
SCE(config if)# no subscriber anonymous-group name group-name [IP-range range][template
template] scmp name peer-device-name
Repeat this step for all anonymous groups assigned to the SCMP peer device.
Step 2
When all anonymous groups have been removed from the device, exit LineCard Interface Configuration
Step 3
mode
SCE(config if)# exit
Step 4 Delete the device
SCE(config)#no scmp name peer_device_name

Defining the Subscriber ID

You can define the structure of the subscriber ID via this command by specifying which of the following
elements to include and in which order:
•
•
•
The GUID is always appended at the end of the subscriber ID as defined by this command.
You must disable the SCMP interface before executing this command.
Note
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
14-14
Calling-Station-Id
NAS-port-Id
User-Name
Chapter 14 Managing the SCMP
OL-7827-12