Table of Contents
Advertisement
Authorization and Command Levels (Hierarchy)
Table 2-2
Mode
Interface Configuration Configuration of specific system
Interface Range
Configuration
Line Configuration
When you login to the system, you have the User authorization level and enter User Exec mode.
Changing the authorization level to Viewer does not change the mode. Changing the authorization level
to Admin automatically moves you to Privileged Exec mode. To move to any of the configuration modes,
you must enter commands specific to that mode.
The list of available commands in each mode can be viewed using the question mark '?' at the end of the
prompt.
Figure 2-1
and exit a mode.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
2-4
CLI Modes (continued)
Description
interface parameters, for the
following interface modes.
•
linecard interface
management interface
•
specific traffic interface
•
Configuration of a range of
traffic interfaces.
Configuration of Telnet lines,
such as an access-list.
illustrates the hierarchical structure of the CLI modes, and the CLI commands used to enter
Chapter 2
Command Line Interface
Level
Prompt indication
Admin
SCE(config if)#
•
•
Root
SCE(config if)#>
•
•
Admin
SCE(config if range)#
•
•
Root
SCE(config if range)#>
•
•
Admin
•
•
SCE (config-line)#
Root
•
•
SCE (config-line)#
>
OL-7827-12
Advertisement
Table of Contents
