Displaying Subscriber Information - Cisco SCE2020-4XGBE-SM Configuration Manual

Chapter 9 Managing Subscribers
How to display subscribers with no mapping
Step 1 From the SCE> prompt, type
How to display the number of subscribers that are mapped to a specified VLAN ID
Options
The following options are available:
•
From the SCE> prompt, type
Step 1
VLAN-id and press Enter.
How to display the number of subscribers with no mapping
Step 1 From the SCE> prompt, type
press Enter.

Displaying Subscriber Information

•
•
•
•
•
You can display the following information about a specified subscriber:
•
•
•
OL-7827-12
show interface linecard 0 subscriber mapping none
VLAN-id — VLAN ID to match
show interface linecard 0 subscriber amount mapping VLAN-id
show interface linecard 0 subscriber amount mapping none
How to display a listing of subscriber properties, page 9-24
How to display complete information for a specified subscriber, page 9-24
How to display values of subscriber properties for a specified subscriber, page 9-24
How to display mappings for a specified subscriber, page 9-25
How to display OS counters for a specified subscriber, page 9-25
values of the various subscriber properties
mappings (IP address, VLAN-ID or MPLS/VPN)
OS counters:
current number of flows
–
bandwidth
–
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Monitoring Subscribers
and press Enter.
and
9-23