Chapter 9
Managing Subscribers
How to Import TIRs from a csv File
From the SCE(config if)# prompt, type
Step 1
[remove-subscriber-mappings]
Imports the TIR definitions from the specified csv file.
If the remove-subscriber-mappings keyword is specified, if subscriber mappings exist for any specified
IP range, they will be removed and the command will execute successfully. Otherwise, if subscriber
mappings exist for any IP range, those IP ranges will not be updated.
How to Export TIRs to a csv File
Step 1
From the SCE(config if)# prompt, type
Enter.
Exports current TIR definitions to the specified csv file.
The remove-subscriber-mappings option is not applicable to this command.
How to Monitor TIRs
•
•
•
•
•
•
•
•
Use these commands to monitor TIRs and subscriber mappings. You can view the following:
•
•
•
•
•
•
•
OL-7827-12
How to Display Traffic Processor Mappings State, page 9-36
How to Display Configuration of a Specified TIR, page 9-36
How to Display Configuration of All TIRs, page 9-36
How to Display Mappings Related to a Specified TIR, page 9-36
How to Display the Number of Subscribers with Mappings Related to a Specified TIR, page 9-36
How to Display Complete Subscriber Information, page 9-36
How to Display All Subscribers Mapped to a Specified IP Range, page 9-37
How to Display the Number of Subscribers Mapped to a Specified IP Range, page 9-37
Traffic processor mappings state, including the partitioning between subscriber and TIR mappings,
and the utilization of each.
Configuration of a specified TIR Configuration of all TIRs
All subscriber mappings related to a specified TIR
Number of subscribers with mappings related to a specified TIR
Information for a specified subscriber, including assigned TIR, where applicable
All subscriber mappings in a specified IP range
Number of subscribers with mappings in a specified IP range
subscriber TP-IP-range import csv-file
and press Enter.
subscriber TP-IP-range export csv-file
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Subscriber Traffic Processor IP Ranges
file-name
file-name and press
9-35