Table of Contents
Advertisement
Configuring and Managing the SNMP Interface
CLI Commands for Monitoring SNMP
Following is a list of CLI commands available for monitoring SNMP. These are Viewer mode commands,
and are available when the SNMP agent is enabled:
•
•
•
•
•
•
•
•
MIBs
•
•
•
•
MIBs (Management Information Bases) are databases of objects that can be monitored by a network
management system (NMS). SNMP uses standardized MIB formats that allow any SNMP tools to
monitor any device defined by a MIB.
The SCE platform supports the following MIBs:
•
•
Since the acquisition of P-cube, Inc by Cisco Systems, Inc, the existing proprietary MIBs have
undergone a process of updating to make them conform to Cisco standards. Note that all Pcube MIBs
since SCOS version 3.0.3 are compiled using SMICNG and are in conformation with Cisco standards
and styling.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
5-36
show snmp (also available when SNMP agent is disabled)
show snmp community
show snmp contact
show snmp enabled
show snmp host
show snmp location
show snmp mib
show snmp traps
MIB Data Objects, page 5-37
Information About MIB-II, page 5-37
Information About ENTITY-MIB, page 5-38
Information About pcube Enterprise MIB, page 5-39
Standard MIBs:
MIB-II (as defined in RFC 1213, Management Information Base for Network Management of
–
TCP/IP-based Internets) and some of its extensions.
ENTITY-MIB version 2 (as defined in RFC 2737)
–
Proprietary MIBs – Pcube enterprise MIBs defined by Cisco, for the Cisco Service Control products
(see
Proprietary MIB Reference, page
Pcube enterprise MIB (pcube) can be divided into different kinds of MIBs:
Proprietary SCOS MIBs – These MIBs contain platform specific information. They also contain
–
the generic definitions of the pcube subtree.
The SE MIB and the Dispatcher MIB are two examples of OS MIBs.
Proprietary Application MIB(s) – These MIBs contain application specific information.
–
Currently, there is one application MIB – Engage MIB.
Proprietary Common MIB(s) – These MIBs contain functionality that is common across more
–
than a single Cisco platform.
Currently there is one common MIB – configuration copy MIB.
Chapter 5
Configuring the Management Interface and Security
B-1.).
OL-7827-12
Advertisement
Table of Contents
