Table of Contents
Advertisement
Chapter 8
Raw Data Formatting: The RDR Formatter and NetFlow Exporting
Example 4
Figure 8-5
destination and the other (billing) being sent to both destinations, in multi-cast mode.
Figure 8-5
RDR Formatter
The forwarding mode is defined for the entire RDR formatter, not just one category. Since the category
"prepaid" goes to only one destination, the forwarding mode is irrelevant. It is relevant, however to the
"billing" category, since it goes to two different destinations.
SCE(config)# rdr-formatter forwarding-mode multi-cast
SCE(config)# rdr-formatter category number 1 name billing
SCE(config)# rdr-formatter category number 2 name prepaid
SCE(config)# rdr-formatter destination 10.1.1.205 port 33000 priority 40 protocol
NetFlowV9 transport udp
SCE(config)# no rdr-formatter destination 10.1.1.205 port 33000 category name prepaid
protocol NetFlowV9 transport udp
SCE(config)# rdr-formatter destination 10.10.10.96 port 33000 category name billing
priority 90 protocol NetFlowV9 transport udp
SCE(config)# rdr-formatter destination 10.1.96.0 port 33000 category name prepaid priority
80prepaid priority 80 protocol NetFlowV9 transport udp
OL-7827-12
illustrates a more complex configuration with one category (prepaid) assigned to one
Configuring Destinations: Two Categories and Two Modes
SCE platform
"Billing"
"Prepaid"
Configuring Data Destinations and Categories
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Destination 1
Destination 2
8-11
Advertisement
Table of Contents
