Importing And Exporting Subscriber Information; Options; How To Import Subscriber Information - Cisco SCE2020-4XGBE-SM Configuration Manual

Chapter 9 Managing Subscribers

Importing and Exporting Subscriber Information

Use the following commands to import subscriber data from csv files and to export subscriber data to
these files:
•
•
•
•
•
•
These subscriber management commands are LineCard interface commands. Make sure that you are in
LineCard Interface command mode.
MPLS/VPN-based subscribers cannot be defined, imported, or exported by a subscriber file.
Note

Options

The following option is available:
•

How to Import Subscriber Information

From the SCE(config if)# prompt, type
Step 1
Imports the subscriber information from the specified file.
Imported subscriber information is added to the existing subscriber information. It does not overwrite
the existing data.
If the information in the imported file is not valid, the command will fail during the verification process
before it is actually applied.
OL-7827-12
subscriber import csv-file
subscriber export csv-file
subscriber anonymous-group import csv-file
subscriber anonymous-group export csv-file
subscriber template import csv-file
subscriber template export csv-file
filename — the name of the csv file.
Importing and Exporting Subscriber Information
subscriber import csv-file
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
filename and press Enter.
9-9