Table of Contents
Advertisement
Chapter 2
Command Line Interface
Command hierarchy levels are indicated as shown in
Table 2-4
This command hierarchy...
User Exec
Privileged Exec
Global Configuration
Interface Configuration
Interface Range Configuration
Line Configuration
Example:
The prompt
•
•
•
Navigating Between Authorization Levels and Command Modes
The authorization levels and command modes function together in one hierarchy. The User and Viewer
authorization levels have only a single command mode. When you enter either the Admin or Root
authorization level (which function in parallel), you enter the Privileged Exec command mode. From
this command mode you can access the other command modes.
•
•
•
•
OL-7827-12
Prompt Indications: Command Mode Levels
SCE1(config if)#
The name of the SCE platform is
The current CLI mode is Interface configuration mode
The user has Admin authorization level
User Exec authorization level
Viewer authorization level
Privileged Exec command mode (you are now in either Admin or Root authorization level)
Global Configuration command mode
From this command mode, the following Interface Command Modes can be accessed:
Management Interface Configuration
–
Linecard Interface Configuration
–
GigabitEthernet Interface Configuration (GBE traffic interfaces)
–
–
Interface Range Configuration (range of traffic interfaces)
–
Line Configuration
Table
Is indicated as...
SCE>
sce#
SCE (config)#
SCE (config if)#
SCE (config if range)#
SCE (config-line)#
indicates:
SCE1
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Authorization and Command Levels (Hierarchy)
2-4.
2-7
Advertisement
Table of Contents
