How To Display The General Scmp Configuration; How To Display The Configuration All Currently Defined Scmp Peer Devices; How To Display The Configuration For A Specified Scmp Peer Device; How To Display The Statistics For All Scmp Peer Devices - Cisco SCE2020-4XGBE-SM Configuration Manual

Chapter 14 Managing the SCMP

How to display the general SCMP configuration

From the SCE> prompt, type show scmp and press Enter.
Step 1
Example
SCE>show scmp
SCMP enabled:
Keep-alive interval:
Loss of synchronization timeout:
Reconnection interval:
Force subscriber on a single SCE: no
Peer sends subscriber data on session start
Subscriber Id structure: GUID

How to display the configuration all currently defined SCMP peer devices

Step 1 From the SCE> prompt, type show scmp all and press Enter.

How to display the configuration for a specified SCMP peer device

From the SCE> prompt, type show scmp name device-name and press Enter.
Step 1
Example
SCE>show scmp name isg
SCMP Connection 'isg' status:
10.56.208.91 auth-port 1812 acct-port 1813
Connection state:
Peer protocol-version: 1.0
Keep-alive interval:
Force single SCE:
Send session start:
Time connected:

How to display the statistics for all SCMP peer devices

From the SCE> prompt, type show scmp all counters and press Enter.
Step 1
OL-7827-12
yes
5 seconds
90 seconds from disconnection
30 seconds
Connected
5 seconds
No
Yes
9 seconds
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Monitoring the SCMP Environment
14-17