Creating Anonymous Groups; Defining Anonymous Groups; How To Define An Anonymous Group; Importing And Exporting Anonymous Groups - Cisco SCE2020-4XGBE-SM Configuration Manual

Creating Anonymous Groups

Creating Anonymous Groups
You can create anonymous groups in two ways:
•
•
For information on deleting anonymous groups, see
Group, page

Defining Anonymous Groups

Use this command to define an anonymous group, assigning the following to the group created:
•
•
•

How to Define an Anonymous Group

Options
The following options are available:
•
•
•
Step 1 From the SCE(config if)# prompt, type subscriber anonymous-group name group-name ip-range
range [template template] and press Enter.
If no template is specified, the default template is applied to all subscribers in this group.

Importing and Exporting Anonymous Groups

•
•
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
9-14
Define the group, along with the related IP address range, using the subscriber anonymous-group
command. The SCE platform then generates anonymous subscribers for that group when it detects
traffic with an IP address that is in the specified IP range.
Create the group by importing anonymous groups from a csv file.
Groups can also be exported to a csv file.
9-12and How to Remove All Anonymous Subscriber Groups, page
group name
range of IP addresses
subscriber template to be assigned to all subscribers within that IP range (optional)
group-name — name to be assigned to the anonymous group.
range — range of IP addresses that defines this group.
template — number of the subscriber template to assign to all subscribers in this group.
Default = 0
How to Import Anonymous Groups, page 9-15
How to Export Anonymous Groups, page 9-15
Chapter 9
How to Remove a Specific Anonymous Subscriber
Managing Subscribers
9-12.
OL-7827-12