Modulesmconnectiondowntrap (1.3.6.1.4.1.5655.4.0.32); Modulesmconnectionuptrap (1.3.6.1.4.1.5655.4.0.33); Moduleoperstatuschangetrap (1.3.6.1.4.1.5655.4.0.34); Portoperstatuschangetrap (1.3.6.1.4.1.5655.4.0.35) - Cisco SCE2020-4XGBE-SM Configuration Manual

Software configuration guide
Table of Contents

Advertisement

Appendix B
Proprietary MIB Reference

moduleSmConnectionDownTrap (1.3.6.1.4.1.5655.4.0.32)

The virtual connection to the SM (Subscriber Manager) is broken.

moduleSmConnectionUpTrap (1.3.6.1.4.1.5655.4.0.33)

The virtual connection to the SM is up and working.

moduleOperStatusChangeTrap (1.3.6.1.4.1.5655.4.0.34)

The value of moduleOperStatus has changed.

portOperStatusChangeTrap (1.3.6.1.4.1.5655.4.0.35)

The value of the portOperStatus object of the portIndex has changed, indicating that the link was
either forced down or the force down was released.

chassisLineFeedAlarmOnTrap (1.3.6.1.4.1.5655.4.0.36)

The agent entity has detected that the chassisLineFeed object in this MIB has changed to the on (3) state.

rdrFormatterCategoryDiscardingReportsTrap (1.3.6.1.4.1.5655.4.0.37)

The agent entity has detected that reports sent to this category are being discarded.
The rdrFormatterCategoryNumReportsDiscarded object in this MIB counts the number of discarded
reports.

rdrFormatterCategoryStoppedDiscardingReportsTrap (1.3.6.1.4.1.5655.4.0.38)

The agent entity has detected that reports sent to this category are no longer being discarded.
The rdrFormatterCategoryNumReportsDiscarded object in this MIB counts the number of discarded
reports.

sessionStartedTrap (1.3.6.1.4.1.5655.4.0.39)

The agent entity has accepted a new session. The pcubeSeEventGenericString1 contains the session type
(telnet/SSH) and client IP address.

sessionEndedTrap (1.3.6.1.4.1.5655.4.0.40)

The agent entity has detected the end of a session. The pcubeSeEventGenericString1 contains the session
type (telnet/SSH) and client IP address.

sessionDeniedAccessTrap (1.3.6.1.4.1.5655.4.0.41)

The agent entity has refused a session from unauthorized source. The pcubeSeEventGenericString1
contains the session type (telnet/SSH) and client IP address.
OL-7827-12
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
B-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce 2000Sce 1000

Table of Contents