Table of Contents
Advertisement
Utilities
Revised: June 15, 2009, OL-7827-12
Introduction
This module describes the following utilities:
•
•
•
The Setup Command
•
•
•
Setup Command Parameters
The setup utility is an interactive wizard that guides the user through the basic configuration process.
This utility runs automatically upon initial connection to the local terminal. It may also be invoked
explicitly via Telnet or via the local terminal to make changes to the system configuration.
Table 4-1
Table 4-1
Parameter
IP address
subnet mask
default gateway
hostname
OL-7827-12
Setup utility command
File operation utility commands
User log utility commands
Setup Command Parameters, page 4-1
Entering the Setup Command, page 4-4
Defining Lists in the Setup Utility, page 4-4
lists all the command parameters for the setup utility.
Setup Command Parameters
C H A P T E R
Definition
IP address of the SCE platform.
Subnet mask of the SCE platform.
Default gateway.
Character string used to identify the SCE platform. Maximum
length is 20 characters.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
4
4-1
Advertisement
Table of Contents
