Table of Contents
Advertisement
Chapter 12
Value Added Services (VAS) Traffic Forwarding
Options
The following options are available:
group-number — The ID number of the VAS server group
•
minimum-active-servers min-number — The minimum number of active servers required for the
•
specified server group
–
failure action — Which of the following actions will be applied to all new flows for the specified
•
server group:
–
–
How to Configure the Minimum Number of Active Servers for a Specified VAS Server Group
From the SCE(config if)# prompt, type VAS-traffic-forwarding VAS server-group group-number
Step 1
failure minimum-active-servers min-number and press Enter.
How to Reset the Minimum Number of Active Servers for a Specified VAS Server Group to the Default
Step 1
From the SCE(config if)# prompt, type default VAS-traffic-forwarding VAS server-group
group-number failure minimum-active-servers min-number and press Enter.
How to Configure the Failure Action for a Specified VAS Server Group
From the SCE(config if)# prompt, type VAS-traffic-forwarding VAS server-group group-number
Step 1
failure action {block | pass} and press Enter.
How to Configure the Failure Action for a Specified VAS Server Group to the Default
Use this command to revert the failure action configuration for the specified VAS server group to the
default value (pass).
From the SCE(config if)# prompt, type default VAS-traffic-forwarding VAS server-group
Step 1
group-number failure action and press Enter.
OL-7827-12
Default — 1
block
pass (default)
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Configuring VAS Traffic Forwarding
12-27
Advertisement
Table of Contents
