How To Display Operational And Configuration Information For A Specific Vas Server Group; Example; How To Display Operational And Configuration Information For All Vas Server Groups - Cisco SCE2020-4XGBE-SM Configuration Manual

Chapter 12 Value Added Services (VAS) Traffic Forwarding
How to Display Operational and Configuration Information for a Specific VAS
Server Group
From the SCE> prompt, type show interface linecard 0 VAS-traffic-forwarding VAS server-group
Step 1
id-number and press Enter.

Example

SCE>show interface linecard 0 VAS-traffic-forwarding VAS server-group 0
VAS server group 0:
State: Failure
minimum active servers required for Active state: 1
How to Display Operational and Configuration Information for All VAS Server
Groups
From the SCE> prompt, type show interface linecard 0 VAS-traffic-forwarding VAS server-group all
Step 1
and press Enter.
How to Display Operational and Configuration Information for a Specific VAS
Server
From the SCE> prompt, type show interface linecard 0 VAS-traffic-forwarding VAS server-id
Step 1
id-number and press Enter.
Example
SCE>show interface linecard 0 VAS-traffic-forwarding VAS server-id 0
VAS server 0:
Configured mode: enable
State: UP
Health Check configured mode: enable
Health Check source port: 63140
Number of subscribers:
OL-7827-12
configured servers: 0
actual mode: enable
status: running
destination port: 63141
0
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
active servers: 0
failure action: Pass
VLAN: 520 server group:
Monitoring VAS Traffic Forwarding
3
12-29