Shutting Down Using The Cisco Imc Cli; Shutting Down Using The Cisco Ucs Manager Equipment Tab - Cisco UCS C220 M5 Maintaining

Shutting Down Using The Cisco IMC CLI

Step 1
In the Navigation pane, click the Server tab.
Step 2 On the Server tab, click Summary.
Step 3
In the Actions area, click Power Off Server.
Step 4 Click OK.
The operating system performs a graceful shutdown and the server goes to standby mode, which is indicated by an amber
Power button/LED.
Step 5 If a service procedure instructs you to completely remove power from the server, disconnect all power cords from the
power supplies in the server.
Shutting Down Using The Cisco IMC CLI
You must log in with user or admin privileges to perform this task.
Step 1
At the server prompt, enter:
Example:
server# scope chassis
Step 2 At the chassis prompt, enter:
Example:
server/chassis# power shutdown
The operating system performs a graceful shutdown and the server goes to standby mode, which is indicated by an amber
Power button/LED.
Step 3 If a service procedure instructs you to completely remove power from the server, disconnect all power cords from the
power supplies in the server.

Shutting Down Using The Cisco UCS Manager Equipment Tab

You must log in with user or admin privileges to perform this task.
Step 1
In the Navigation pane, click Equipment.
Step 2 Expand Equipment > Rack Mounts > Servers.
Step 3
Choose the server that you want to shut down.
Step 4 In the Work pane, click the General tab.
Step 5
In the Actions area, click Shutdown Server.
Step 6
If a confirmation dialog displays, click Yes.
The operating system performs a graceful shutdown and the server goes to standby mode, which is indicated by an amber
Power button/LED.
Maintaining the Server
8
Maintaining the Server