Cisco SCE2020-4XGBE-SM Configuration Manual page 132

Configuring and Managing the SNMP Interface
These are the details of specific objects in this MIB:
ifindex
ifPhysAddress
IfAdminStatus
IfOutQLen
Under ifXTable: ifname The same as ifDescr.
ifpromiscuousmode
ifRcvAddressTable
iftesttable
Information About ENTITY-MIB
ENTITY-MIB, page 5-38
•
entityPhysical group, page 5-39
•
entityGeneral group, page 5-39
•
ENTITY-MIB
The Entity-MIB contains five groups of MIB objects:
entityPhysical group
•
• entityLogical group
• entityMapping group
• entityGeneral group
entityNotifications group
•
The SCOS implements only the physical and the general groups of the Entity-MIB, since the other
groups are not relevant to the SCE platform.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
5-38
Chapter 5
The numbering of the interfaces is such that the port(s) come first.
For Management interfaces, this is the MAC address.
For traffic interfaces, this is an all zeros address.
Write operation to this object is not supported. This is OK according to
Ethernet MIB RFC2665 section 3.2.7
Always returns 0.
Management interface – "false".
Traffic interfaces – "true".
Not implemented
Was deprecated by RFC-2233, and is therefore not implemented
Configuring the Management Interface and Security
OL-7827-12