Chapter 12
Value Added Services (VAS) Traffic Forwarding
Configuration of the traffic mirroring solution is distributed between the SCA BB console and the SCE
platform CLI:
•
In a cascaded topology, the VAS traffic link should always be Link 0.
Note
•
Monitoring Traffic Mirroring
Use the same commands to monitor traffic mirroring as for regular VAS functionality. (See
VAS Traffic Forwarding, page
OL-7827-12
SCE platform CLI configuration:
There are three broad aspects to traffic mirroring configuration in the SCE platform:
Configuring the VAS traffic link. (See
–
Configuring the VLAN tag per VAS server. (See
–
a Specified VAS Server, page
Associating servers with server groups. (See
–
The health check is not relevant to traffic mirroring, so there is no need to configure anything related
to the VAS health check.
SCA BB console configuration — the traffic mirroring rules, meaning which portion of the
subscriber traffic should be mirrored to the VAS servers.
This configuration is defined per package so different subscribers can receive different mirroring
service, based on the package they bought.
How to Select the Link for VAS Traffic, page
12-21)
How to Add and Remove Servers, page
12-28)
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Intelligent Traffic Mirroring
How to Configure the VLAN Tag Number for
12-19)
12-25)
Monitoring
12-51