Displaying Data Destination Configuration And Statistics; How To The Display The Current Rdr Formatter Configuration; Displaying The Rdr Formatter Configuration: Example - Cisco SCE2020-4XGBE-SM Configuration Manual

Software configuration guide
Table of Contents

Advertisement

Chapter 8
Raw Data Formatting: The RDR Formatter and NetFlow Exporting

Displaying Data Destination Configuration and Statistics

The following commands can be used to display the RDR formatter configuration and statistics:
Refer to the
other show rdr-formatter commands.

How to the Display the Current RDR Formatter Configuration

The system can display the complete data destination configuration, or just specific parameters.
From the SCE> prompt, type
Step 1
Displays the current RDR formatter configuration.

Displaying the RDR Formatter Configuration: Example

The following example shows how to display the current RDR formatter configuration.
SCE#show rdr-formatter
Status: enabled
Connection is: up
Forwarding mode: redundancy
Connection table:
-------------------------------------------------------------------------|
Collector
IP Addres / |
Host-Name
-------------------------------------------------------------------------|
10.1.1.205
10.1.1.206
10.12.12.12 |33000|Up
-------------------------------------------------------------------------|
RDR:
UM:
Logger: queued:
Last time these counters were cleared: 20:23:05
OL-7827-12
show rdr-formatter
show rdr-formatter connection-status
show rdr-formatter counters
show rdr-formatter destination
show rdr-formatter enabled
show rdr-formatter forwarding-mode
show rdr-formatter rdr-mapping
show rdr-formatter statistics
show rdr-formatter protocol NetFlowV9 dscp
Cisco SCE 2000 and SCE 1000 CLI Command Reference
show rdr-formatter,
| Port|Status|
|
|-----------------------------------------------|
|
|
|Category1
|33000|Up
|100 primary|100 primary|100 primary|100 primary|
|33000|Down
|60
|40
queued:
0, sent:4460807,
queued:
0, sent:
0, sent:
Displaying Data Destination Configuration and Statistics
and press Enter.
Priority per Category:
|Category2
|Category3
|60
|60
|40
|40
thrown:
0,
format-mismatch:0
0,
thrown:
0
39,
thrown:
0
IST
WED March 14 2007
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
for a complete description of the
|
|Category4
|
|60
|
|40
|
8-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce 2000Sce 1000

Table of Contents