Raw Data Formatting: The RDR Formatter and
NetFlow Exporting
Revised: June 15, 2009, OL-7827-12
Introduction
Cisco Service Control is able to deliver gathered reporting data to an external application for collecting,
aggregation, storage and processing over two protocols:
•
•
These two protocols can be used simultaneously in the same deployment. However, any specific
destination (external collector) to which data is sent can be configured with only one protocol.
•
•
•
•
•
•
•
Information About the RDR Formatter and NetFlow Exporting
Support
•
•
•
OL-7827-12
RDRv1: the Service Control proprietary export protocol
NetFlow V9: an industry standard export protocol
Information About the RDR Formatter and NetFlow Exporting Support, page 8-1
Configuring Data Destinations and Categories, page 8-6
Configuring the RDR Formatter, page 8-13
Configuring the NetFlow Exporting Support, page 8-14
Configuring Dynamic Mapping of RDRs to Categories, page 8-15
Displaying Data Destination Configuration and Statistics, page 8-17
Disabling the Linecard from Sending RDRs, page 8-19
The RDR Formatter, page 8-2
NetFlow, page 8-2
Data Destinations, page 8-3
C H A P T E R
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
8
8-1