Table of Contents
Advertisement
Appendix B
Proprietary MIB Reference
linkAdminModeOnActive (1.3.6.1.4.1.5655.4.1.4.1.1.3)
The desired mode of the link when the operating status of the module is active and it is not in boot or
failure.
Possible values ( LinkModeType ):
•
•
Access
Syntax
LinkModeType
linkAdminModeOnFailure (1.3.6.1.4.1.5655.4.1.4.1.1.4)
The desired mode of the link when the system status is failure.
Possible values ( LinkModeType ):
•
•
Access
Syntax
LinkModeType
linkOperMode (1.3.6.1.4.1.5655.4.1.4.1.1.5)
The current operational mode of the link.
Possible values ( LinkModeType ):
•
•
•
Access
Syntax
LinkModeType
OL-7827-12
Bypass — the traffic is forwarded from one port to the other using an internal splitter.
Forwarding — the traffic is forwarded by the internal hardware and software modules of the SCE
platform.
Bypass — the traffic is forwarded from one port to the other using an internal splitter.
Cutoff — all traffic is dropped by the SCE.
Bypass — the traffic is forwarded from one port to the other using an internal splitter with no
processing taking place.
Forwarding — the traffic is forwarded by the internal hardware and software modules of the SCE.
Sniffing — the traffic is forwarded in the same manner as in Bypass mode, however it passes through
and is analysed by the internal software and hardware modules of the SCE platform.
RO
RO
RO
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
B-41
Advertisement
Table of Contents
