Cisco SCE2020-4XGBE-SM Configuration Manual page 392

Software configuration guide
Table of Contents

Advertisement

Managing MPLS/VPN Support
To List All Subscribers for a Specified VPN
Step 1
From the shell prompt, type the following command:
Listing All Subscribers for a Specified VPN: Example
p3vpn –show-sub --vpn=vpn1
sub1: 10.1.1.0/24@vpn1
sub2: 20.1.1.0/24@vpn1
Command terminated successfully
To Display the Mappings for a Specified VPN
From the shell prompt, type the following command:
Step 1
Listing All Subscribers for a Specified VPN: Example
p3vpn --show --vpn=vpn1
Name:
Domain:
Mappings:
MPLS/VPN: 1:1000@10.0.0.1
MPLS/VPN: 1:1000@10.0.0.2
Command terminated successfully
How to Manage VPN Mappings
To Remove All Existing Mappings from a Specified VPN, page 13-26
To Remove a Specified Mapping from a Specified VPN, page 13-26
To Remove All Existing Mappings from a Specified VPN
From the shell prompt, type the following command: p3vpn –-remove-all-mappings
Step 1
--vpn=VPN-Name
To Remove a Specified Mapping from a Specified VPN
From the shell prompt, type the following command: p3vpn –-remove-mappings --vpn=VPN-Name
Step 1
--mpls-vpn=RT@PE,(RT@PE2, RT@PE3,...)
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
13-26
vpn1
subscribers
(no BGP information)
label: 10 IP range: 1.1.1.1/32
Chapter 13
p3vpn –-show-sub --vpn=VPN-Name
p3vpn –-show --vpn=VPN-Name
MPLS/VPN Support
OL-7827-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce 2000Sce 1000

Table of Contents