Table of Contents
Advertisement
Managing MPLS/VPN Support
Options
The following options are available:
ip-range — The IP range for which to display mapped subscribers
•
vpn-name — The name of the VPN for which to display mappings.
•
From the SCE> prompt, type show interface linecard 0 subscriber mapping included-in IP ip-range
Step 1
VPN vpn-name and press Enter.
The VPN option allows you to search for subscribers with a private IP mapping
Displaying Subscribers Mapped to a IP range on a Specified VPN: Example
SCE> show interface linecard 0 subscriber mapping included-in IP 10.0.0.0/0 VPN vpn1
Subscribers with IP mappings included in IP range '10.0.0.0/0'@vpn1:
Subscriber 'Sub10', mapping '10.1.4.150/32@vpn1'.
Subscriber 'Sub10', mapping '10.1.4.149/32@vpn1'.
Subscriber 'Sub10', mapping '10.1.4.145/32@vpn1'.
Subscriber 'Sub11', mapping '10.1.4.146/32@vpn1'.
Total 2 subscribers found, with 4 matching mappings
How to Display the Number of Subscribers Mapped to an IP range on a Specified VPN
•
Options, page 13-20
•
Displaying the Number of Subscribers Mapped to range on a Specified VPN: Example, page 13-20
Options
The following options are available:
ip-range — The IP range for which to display mapped subscribers
•
vpn-name — The name of the VPN for which to display mappings.
•
Use the 'amount 'keyword to display the number of subscribers rather than a listing of subscriber names.
Step 1
From the SCE> prompt, type show interface linecard 0 subscriber amount mapping included-in IP
ip-range VPN vpn-name and press Enter.
Displaying the Number of Subscribers Mapped to range on a Specified VPN: Example
SCE> show interface linecard 0 subscriber amount mapping included-in IP 0.0.0.0/0 VPN vpn1
There are 2 subscribers with 4 IP mappings included in IP range '0.0.0.0/0'.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
13-20
Chapter 13
MPLS/VPN Support
OL-7827-12
Advertisement
Table of Contents
