Chapter 9
Managing Subscribers
Use the following commands to remove all subscribers, anonymous groups, or subscriber templates from
the system.
•
•
•
•
Use the following commands to remove a specific subscriber or anonymous group from the system.
•
•
These subscriber management commands are LineCard interface commands (with the exception of the
clear subscriber anonymous command, which is a Privileged Exec command). Make sure that you are
in LineCard Interface command mode, and that the SCE(config if)# prompt appears in the command line.
How to Remove a Specific Subscriber
Options
The following option is available:
•
From the SCE(config if)# prompt, type
Step 1
Removes the specified subscriber.
How to Remove All Introduced Subscribers
From the SCE(config if)# prompt, type
Step 1
Removes all introduced subscribers.
OL-7827-12
no subscriber all
no subscriber anonymous-group all
clear subscriber anonymous
default subscriber template all
no subscriber name
no subscriber anonymous-group name
subscriber-name — the name of the subscriber to be removed
subscriber-name and press Enter.
no subscriber name
and press Enter.
no subscriber all
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Removing Subscribers and Templates
9-11