Table of Contents
Advertisement
Chapter 5
Configuring the Management Interface and Security
How to Define Recurring Daylight Saving Time Transitions
From the SCE(config)# prompt, type clock summer-time zone recurring [week1 day1 month1 time1
Step 1
week2 day2 month2 time2 [offset ]] and press Enter.
Configures daylight saving time to start and stop on the specified days every year.
Defining Recurring Daylight Saving Time Transitions: Example
The following example shows how to configure recurring daylight saving time for a time zone designated
"DST" as follows:
•
•
•
SCE(config)# clock summer-time DST recurring last Sunday March 00:00
23:59
How to Define Non-Recurring Daylight Saving Time Transitions
From the SCE(config)# prompt, type clock summer-time zone [date1 month1 year1 time1 date2
Step 1
month2 year2 time2 [offset ]] and press Enter.
Enables privileged EXEC mode.
Defining Non-Recurring Daylight Saving Time Transitions: Example
The following example shows how to configure non-recurring daylight saving time for a time zone
designated "DST" as follows:
•
•
•
SCE(config)# clock summer-time DST April 16 2004 00:00 October 23 2004 23:59
How to Cancel the Daylight Saving Time Configuration
From the SCE(config)# prompt, type no clock summer-time and press Enter.
Step 1
Removes all daylight saving configuration.
OL-7827-12
Daylight saving time begins — 0:00 on the last Sunday of March.
Daylight saving time ends — 23:59 on the Saturday of fourth week of November.
Offset = 1 hour (default.
Daylight saving time begins — 0:00 on April 16, 2004.
Daylight saving time ends — 23:59 October 23, 2004.
Offset = 1 hour (default)
Configuring Time Clocks and Time Zone
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
4 Saturday November
5-63
Advertisement
Table of Contents
