Migrating Acs Se On The Acs 1111 Or Acs 1112 Or Acs 1113 Platform To Csacs 1120 - Cisco 1120 Installation Manual

Chapter 5 Upgrading and Migrating to Cisco 1120 Secure Access Control Server
Migrating ACS SE on the ACS 1111 or ACS 1112 or ACS 1113
Platform to CSACS 1120
Table 5-2
supports.
Table 5-2
Cisco Secure ACS
Solution Engine
Platform
Cisco 1111
Cisco 1112
Cisco 1113
CSACS 1120
To migrate the ACS software running on a previous SE appliance platform (the Cisco 1111, the Cisco
1112 or the Cisco 1113) to run on the ACS 4.2 CSACS 1120:
Step 1 Upgrade the software on a previous SE hardware platform (the Cisco 1111 or the Cisco 1112) to ACS
version 4.1 by using the full upgrade method. For information on this method, see
Step 2 Back up the 4.1 software on the previous SE hardware platform.
Use the ACS 4.2 Recovery DVD to re-image the appliance with ACS 4.2 and then restore the
Step 3
4.1 configuration.
For information on Steps 2 and 3, see
OL-19455-01

Migrating ACS SE on the ACS 1111 or ACS 1112 or ACS 1113 Platform to CSACS 1120

indicates the Cisco Secure ACS software versions that each Cisco Secure ACS SE platform
Supported Versions
Cisco Secure ACS
version 4.2
No
Yes
Yes
Yes
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Cisco Secure Cisco Secure ACS
ACS version 4.0.1 version 3.3.4
and 4.1
Yes Yes
Yes Yes
Yes Yes
No No
Migrating from ACS for Windows to ACS
Cisco Secure ACS
version 3.2
Yes
No
No
No
Upgrade Procedure.
SE.
5-21