Associating Diameter Endpoint With Mme-Hss Service; Configuring Failure Handling Actions On Hss - Cisco ASR 5000 Series Administration Manual

▀ MME-HSS Service Configuration

Associating Diameter Endpoint with MME-HSS Service

Use the following example to associate the preconfigured Diameter endpoint configuration with this MME-HSS service
and define the Diameter dictionary:
configure
context <vpn_ctxt_name>
mme-hss-service <hss_svc_name>
diameter endpoint <diameter_endpoint_name>
diameter dictionary standard
end
Notes:
<diameter_endpoint_name> is a preconfigured eGTP service configured at step 1.
For more information on Diameter endpoint configuration, refer Configuring Diameter AAA Functionality
section provided in AAA Interface Administration and Reference.

Configuring Failure Handling Actions on HSS

Use the following example to configure the various actions on event of a request message failure with HSS on S6a
interface:
configure
context <vpn_ctxt_name>
mme-hss-service <hss_svc_name>
failure-handling {authentication-information-request | check-identity-
request | notify-request | purge-ue-request | update-location-request} {
diameter-result-code <start_error_code> [to <end_error_code>] | request-timeout
} action {continue | retry-and-terminate | terminate }
end
Notes:
For more information on Diameter endpoint configuration, refer Configuring Diameter AAA Functionality
section provided in AAA Interface Administration and Reference.
▄ Cisco ASR 5000 Series Mobility Management Entity Administration Guide
74
MME Service Configuration Procedures
OL-22987-01