No Screen Display Or Display Drifts; Incorrect Date And Time; Drives Reported As "Dead" When Starting System - Cisco C880 M5 Installation Manual

8.4

No screen display or display drifts

The wrong horizontal frequency or resolution has been selected for the
monitor or for the application program.
Find out which horizontal frequency your monitor screen supports. You will

find the horizontal frequency (also known as line frequency or horizontal
deflection frequency) in the documentation for your monitor.
Refer to the documentation for your operating system or the software for the

screen controller for details of how to set the correct horizontal frequency for
your monitor, and follow the procedure accordingly.
8.5

Incorrect date and time

Set the date and time in the operating system or in the BIOS Setup under

the Information menu, using System Date and System Time respectively.
Note that the operating system may affect the system time. For example,
the operating system time may deviate from the system time under
Linux, and would overwrite the system time in the default setting on
shutdown.
If the date and time are still wrong after the server has been switched off and
back on again, replace the lithium battery (for a description refer to the "Cisco
C880 M5 BIOS Setup Guide") or contact our customer service team.
8.6 Drives reported as "dead" when starting
system
RAID controller configuration incorrect
Check and correct the settings for the drives using the RAID controller utility.

Further information is provided in the manual for the RAID controller.
Cisco C880 M5 Installation manual
79