Adjustment/Maintenance; Overview Of Adjustment/Maintenance; Color Registration Procedure - Kyocera TASKalfa 306ci Operation Manual

Troubleshooting > Adjustment/Maintenance

Adjustment/Maintenance

Overview of Adjustment/Maintenance

If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.
The table below lists the item you can carry out.
Item

Color Registration Procedure

Tone Curve Adjustment
Drum Refresh
Calibration
Laser Scanner Cleaning

Color Registration Procedure

When first installing the machine or moving it to a new location, color drift during printing may occur. Use this function to
correct the color position of each of cyan, magenta and yellow to resolve color drift.
Auto registration and manual registration are available for Color Registration. Color drift can be largely corrected through
auto registration. However, if it is not resolved or to perform more detailed settings, use the manual registration.
NOTE
To perform color registration, verify that either Letter or A4 paper is loaded into a cassette.
IMPORTANT
Before performing color registration, be sure to perform Calibration. If color drift remains, perform color
registration. By performing color registration without performing Calibration, the color drift will be resolved
once, however, it may cause the serious color drift later.
Auto Correction
1
Correct the color position to resolve color drift.
The printed output tone may differ from the original. Perform this function
to ensure consistency with the original tone.
Remove image blur and white dots from the printout.
Adjust color drift or hue of printed image in the most appropriate color.
Adjust the printed image that is too light or incomplete, even though there
is enough toner.
Load paper.
Description
10-30
Reference Page
page 10-30
page 10-35
page 10-36
page 10-37
page 10-37