VTS Medical Systems VENTUS COMPACT VVS021c Instructions For Use Manual page 96

A26
A27
A28
A29
www.vtsgroup.com OIMM VENTUS COMPACT - ver. 6.0.0 (06.2024)
•
"Outdoor temperature"
temperature (sensor B3) below which the
water heater pump is permanently activated
•
"Outdoor temperature"
temperature below which the water heater
valve is permanently controlled
•
"Valve minimum" - the opening control value
of the water heater valve when it is activated
due to low outside temperature
•
"Delay between relay output activations" -
minimum time between
activations of the relay output, responsible for
permitting the operation of the gas heater
•
"Outdoor temperature"
temperature (sensor B3) above which the
protection of the water heater in summer
mode is active
•
"Setpoint" - return water temperature from
the water heater (sensor B5) to be maintained
when protection is active in summer mode
•
"Pre-heater - adjustment" - a function that
allows the pre-heater to be used also as the
last heating section
•
"PID output signal" - current control of the
PID controller of the pre-heater used as the
last heating section
•
"Kp" - gain factor of the PID controller of the
pre-heater used as the last heating section
•
"Ti" - doubling time of the PID controller of the
pre-heater used as the last heating section
- outdoor
- outdoor
consecutive
- outdoor
96