CONFIGURATION OF THE UPC3 CONTROLLER - mHMI and HMI ADVANCED
!
If a Plug&Play VENTUS COMPACT device has been ordered together with an mHMI
module, it has the parameters set for mHMI operation.
!
The ability to modify the page requires access to a standard service password. Set the
parameters as shown in the illustration.
www.vtsgroup.com
OIMM VENTUS COMPACT - ver. 6.0.0 (06.2024)
•
"Address" - address of the controller used
for external protocol communication
•
"Speed" - speed (baudrate) of the external
controller protocol
•
"External port of the pLan controller" - type
of protocol used by the controller's pLan port
(RJ11 socket)
[for mHMI, the value of the pLan port parameter
should be set to "mHMMI" accordingly].
•
"Address" - address of the controller used for
communication using the external protocol
•
"Speed" - speed (baudrate) of the external
controller protocol
•
"External port of the pLan controller" - type
of protocol used by the controller's pLan port
(RJ11 socket)
[depending on the HMI selected, the value of the
pLan port parameter should be set accordingly
on the HMI Advanced
72
Need help?
Do you have a question about the VENTUS COMPACT VVS021c and is the answer not in the manual?