Rotary Heat Exchanger (Regenerative Heat Exchanger) - VTS Medical Systems VENTUS COMPACT VVS021c Instructions For Use Manual
Compact air handling units
Hide thumbs
Also See for VENTUS COMPACT VVS021c:
- Operation and maintenance manual (21 pages) ,
- Quick start up manual (25 pages) ,
- Instructions for use manual (121 pages)
Table of Contents
Advertisement
5.6 ROTARY HEAT EXCHANGER (REGENERATIVE HEAT
EXCHANGER)
!
!
The rotary heat exchanger is factory connected to the connection point of the air handling unit
and the Control system.
The rotary exchanger is driven by a drive unit consisting of a geared motor (squirrel-cage motor + worm
gear) and a frequency converter. The control system is adapted for connection of a standard 0-10V
control signal and for operation in an RS485 network using the Modbus protocol. The frequency
converter is supplied with single-phase AC voltage 1 230V/50Hz.
!
See instructions at
www.vtsgroup.com
!
Installation, Operation and Maintenance Manual Vts Ec Motor Drive / Technical Terms and
Conditions for Drives with EC Motors for VTS Units
www.vtsgroup.com
:
OIMM VENTUS COMPACT - ver. 6.0.0 (06.2024)
37
Advertisement
Table of Contents
Need help?
Do you have a question about the VENTUS COMPACT VVS021c and is the answer not in the manual?