Standard Equipment With Factory-Fitted Control Elements - VTS Medical Systems VENTUS COMPACT VVS021c Instructions For Use Manual

6.1 STANDARD EQUIPMENT WITH FACTORY-FITTED CONTROL
ELEMENTS
STANDARD CONTROL COMPONENTS - ASSEMBLY AND CONNECTION AT THE FACTORY
Designation
uPC3 controller
Terminal 1 (T1)
Security
B2 Temperature sensor
H2 Moisture sensor
B4 Temperature sensor
B6 Temperature sensor
B3 Temperature sensor
Differential pressure sensor
Differential pressure sensor
Differential pressure sensor
Differential pressure sensor
The sensors are mounted in the heat recovery section.
www.vtsgroup.com
Name
Control switchgear
Connection terminal for peripheral Control
components
Control switchgear
Return air from the room
(extract before recovery)
Return air from the room
(extract before recovery)
Exhaust air
(exhaust after recovery)
Supply air
(for recovery)
Outside air
(before recovery)
Supply air (pre-filter)
Supply air (fan)
Exhaust air (pre-filter)
Exhaust air (fan)
OIMM VENTUS COMPACT - ver. 6.0.0 (06.2024)
Location
(according to the diagram)
39