Labeling; Image Adjustment - Omron ZFX-C User Manual

Labeling

A group of colors to be measured is counted as a "label." Label Nos. are assigned to each label after being
arranged in order of position and size. The total number of labels and the size/position of any label can be output.
Note
This item is not provided for the ZFX-C10/C15.
Setup
The color of the measurement tar-
get is picked up.
Note
When a color camera is connected, up to four colors can be specified as the color to be measured. When a monochrome
camera is connected to the Controller, black-and-white images are binarized. White pixels are targeted in measurement.

Image adjustment

This function picks up the color to be measured.
MENU mode - [Setup] - [Item] - [Img Adj]
Item Description
Select camera
Color Pickup/Binary
(Filtering, BGS level, Brightness Control can be used only when a monochrome camera is
Filtering
connected.)
BGS level
Brightness Control
Region settings
This function sets the measurement region.
MENU mode - [Setup] - [Item] - [Region]
Item Description
Measurement region This function sets the region to be measured.
Reference registration When the measurement region is set, measurement is executed on the display image, and the
result of execution is registered as the reference value. To re-register only reference values, you
can use this function to re-register only reference values based on the image currently on screen.
ZFX-C User's Manual
Measurement
A group of picked up colors is detected as a label.
Number of picked up labels: 3
Measurement region
For details, see "Image Adjustment". p.99
Setting the Region p.213
Label Nos. when the area is
arranged in order of the
largest area
Label 0
Label 1
Label 2
Setting Measurement Items
67