File Manage - Saluki STB6684 Operation Manual

STB6684/A Operation Manual
5.2 <FILE MANAGE>
STB6684 series can save parameters that are set by user to the internal non-volatile
memory in file format. User can load the file to use these parameters instead of reseting.
This section will introduce the information about the function of Save/ Recall.
Notation explanation:
E: Abbreviation of External, representing external memory, like U disk.
I: Abbreviation of Internal, representing internal memory, like internal Flash of STB6684.
Introduction to Save/ Recall
By the function of save/recall, user can save measurement results and
configuration information to STB6684 internal Flash or external U disk; meanwhile
user can recall data from STB6684 internal Flash or external U disk.
Save and function:
Table 5-2-1 shows the applicable save methods and applications:
Save
Type
Configuration save
(Internal Flash)
Configuration save
(External U disk)
Data save
(External U disk)
Screen save
(External U disk)
Folder/ structure in U disk
It is suggested that user should build a file and folder, shown as table 5-2-2. If user wants to
save the file to the new folder, enter the folder firstly then operate.
Table 5-2-1
Recall?
Format
*.STA
*.STA
*.CSV
*.BMP
◇ 66
Chapter 5 [SYSTEM]
Function
Yes Save the
configuration status
of STB6684 to
internal Flash.
Yes Save the
configuration status
of STB6684 to
external U disk.
No Save the test result to
external U disk.
No Save the screen
picture of STB6684
to external U disk.