Password; Bus Mode - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

5.1.7 Password

Set the password protection mode.
Operational steps for setting the password protection:
Move the cursor to PASS WORD, the following softkeys will be displayed:
OFF
This softkey is used to turn off the password protection function.
LOCK SYSTEM
This softkey is used to turn on the password protection function, including file
protection and boot password.
MODIFY
This softkey is used to modify the password. The instrument will prompt user to
input old password, new password and to confirm the new password until the
modification is done.
————————————————————————————————————
NOTE: The default password for STB6684 is 2684.
————————————————————————————————————

5.1.8 Bus mode

Set RS232C interface or GPIB interface as the interface bus. See chapter 8 Remote
Control for details.
Operational steps for setting the bus mode:
1) Move the cursor to BUS MODE, the following softkeys will be displayed:
RS232C
GPIB
USBTMC
USBCDC
2) Press RS232C to select RS232C interface bus.
3) Press GPIB to select GPIB interface bus.
————————————————————————————————————
NOTE: GPIB mode cannot be set until the GPIB optional is purchased from
our company and installed.
————————————————————————————————————
◇ 64
Chapter 5 [SYSTEM]