Useradjust Subsystem Commands - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

9.5.12 UserADJust subsystem commands

UserADJust subsystem commands are used to set user adjust function, open circuit and load adjust.
UserADJust
The :OPEN:STATe command sets the open circuit adjustment state.
The UserADJust:OPEN:STATe? query retuns the current state of open circuit adjust function.
Command syntax:
UserADJust:OPEN:STATe
Where,
1 (49) enables the open circuit adjust function, which is equal to ON.
0 (48) disables the open circuit adjust function, which is equal to OFF.
For example: WrtCmd("UADJ:OPEN:STAT ON")
Query syntax: UserADJust:OPEN:STATe?
Return format: <NR1><NL^END>
The :OPEN:APPLy sets the open circuit adjust to ON.
The UserADJust:OPEN:APPLy? query returns that the current open circuit function comes to a
success or not.
:OPEN :STATe ON (1)
:APPLy RN1
:CLEAr RN1
:LOAD :STATe ON (1)
:START
:APPLy
:CLEAr
:STOP
:NOMInal <value>
ON
OFF
1
0
◇ 117
Chapter 9 Command Reference
OFF (0)
RN2
RN3
RN4
RN5
RN6
RN7
ALL
RN2
RN3
RN4
RN5
RN6
RN7
ALL
OFF (0)