Table of Contents
Advertisement
STB6684/A Operation Manual
9.4 Input format
The input command must consists of at least 4 letters followed be a "?" or a whitespace, and then
the data.
The input data can be a fix-point number or a floating-point number followed by a sign or not.
For example:
Exponents can be replaced by the following mnemonics, such as 1E+00 or 1K.
Prototype
Mnemonic
1E+18
EX
1E+15
PE
1E+12
T
1E+9
G
1E+6
MA
1E+3
K
1E-3
M
1E-6
U
1E-9
N
1E-12
P
1E-16
F
Suffix like V, Ω, A or s is optional.
The command used to turn on/ off the instrument or a function can be ON/OFF or 0/1.
If a large number of setting commands are used, the spill of the input buffer is possible. One way to
stop spilling is using command abbreviations (Use the first 4 letters in the command name) and
does not send the leading zero in the data. Use 0/1 to replace ON/OFF.
1V
+1.0E+00
10E-01
0.001K
.000001MA
◇ 103
Chapter 9 Command Reference
Advertisement
Table of Contents
