Seqsetup Subsystem Commands - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

9.5.14 SEQSetup subsystem commands

The SEQSetup subsystem commands are used to set parameters in the sequence setup page.
SEQSetup
The :CHIOce command sets the test sequence in the sequence setup page.
The XYGRaph: CHIOce? query returns the current test sequence number.
Command syntax:
SEQSetup : CHIOce
For example: WrtCmd ("SEQSetup : CHIOce USER1"); set USER1 as the test sequence.
Query syntax: XYGRaph: CHIOce?
:CHIOce DEF1
DEF2
DEF3
DEF4
USER1
USER2
USER3
USER4
:DELete USER1
USER2
USER3
USER4
:COPY DEF1
DEF2
DEF3
DEF4
USER1
USER2
USER3
USER4
:PASTe USER1
USER2
USER3
USER4
DEF1
DEF2
DEF3
DEF4
USER1
USER2
USER3
USER4
◇ 122
Chapter 9 Command Reference