Scan Setup; Selected Seq - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

4.7 SCAN SETUP

Press [SETUP], and then MORE 1/2 and SCAN SETUP to enter into the <SCAN SETUP>
page.
Figure 4-7:
The following parameters can be set in the <SCAN SETUP> page:

■ SELECTED SEQ.

■ SCAN START NUM
■ SCAN END NUM
■ SCAN RESULT
■ SCAN CONNECT
4.7.1 SELECTED SEQ.
Items in this sequence is the same as that in <SEQ. SETUP>.
Operational steps for setting sequence：
1）Move the cursor to SELECTED SEQ., the following softkeys will be displayed.
20 SEC SEQ.
Chapter 4 [SETUP]
◇ 55