Table of Contents
Advertisement
STB6684/A Operation Manual
3.3 BARGRAPH DISP
Press [DISP] and select BAR. DISP to enter into the <BARGRAPH DISP> page.
Bargraph display function is used to substitute and simulate the functions of multimeters.
Figure 3-3:
In this page, measurement result is displayed in bargraph format and large character. The
following measurement control parameters can be set:
BAR SCALE
FILE
There are two control zones in this page: BAR SCALE and FILE. They will be dealt with
later.
Following informations are present in the measurement result/ conditions zone:
Bargraph display
Resistance/ current（R / I）
BIN number
Range auto monitoring
HV1
HV2
Measurement step monitoring (STEP)
High voltage monitoring time (TIME)
（R / I）
（BIN）
◇ 20
Chapter 3 [DISP]
Advertisement
Table of Contents
