Scan Start Num; Scan End Num - Saluki STB6684 Operation Manual

STB6684/A Operation Manual
60 SEC SEQ.
20 SEC MEAS.
60 SEC MEAS
MORE 1/2
2）Use above softkeys to select the sequence. If the desired softkey is not displayed in the
current page, press MORE 1/2 to show mo re softkeys.
USER1
USER2
USER3
USER4
MORE 2/2
3）If the desired sequence is missed, repeat step1 and step 2 to select the desired one.

4.7.2 SCAN START NUM

There are 32 scan channels at most and the number ranges from 0 to 31.
Operational steps for setting the scan start number:
1）Move the cursor to SCAN START NUM, the following softkeys will be displayed:
↑（+）
This softkey is used to increase the scan start number by 1.
↓（-）
This softkey is used to decrease the scan start number by 1.
2）Use above softkeys to set the scan start number, or numerical keys and [ENTER] to input
the desired one.

4.7.3 SCAN END NUM

There are 32 channels at most and scan number ranges from 0 to 31.
Operational steps for setting the scan end number:
1）Move the cursor to SCAN END NUM, the following softkeys will be displayed:
↑（+）
This softkey is used to increase the scan number by 1.
↓（-）
Chapter 4 [SETUP]
◇ 56