Table of Contents
Advertisement
STB6684/A Operation Manual
SEQUENCE SETUP is mainly used to set parameters in the SEQUENCE DISP page.
The following control parameters can be set in the <SEQUENCE SETUP> page:
Select the sequence number
DEFAULT SEQ.
User SEQ.
FILE
4.4.1 SELECTED SEQ.
It is used to select the reference test sequence for the <SEQUENCE DISP> page.
Two test sequences are available: default sequence and user sequence.
Operational steps for selecting a sequence:
1) Move the cursor to SELECTED SEQ., the following softkeys will be displayed:
20 SEC SEQ.
60 SEC SEQ.
20 SEC MEAS.
60 SEC MEAS
Chapter 4 [SETUP]
（SELECTED SEQ.）
◇ 38
Advertisement
Table of Contents
